The stage microphone hoist descends to a certain position and suddenly stops, unable to descend further, only able to ascend

The stage microphone hoist descends to a certain position and suddenly stops descending. It can only ascend. If something is hung on the hoist, it can continue to descend. This may be because the hoist has activated a anti-loosening device. This function is designed to prevent the hoist from losing its load weight, which could cause the internal audio wires of the hoist to become loose, tangled, or twisted. It acts as a safety feature to effectively prevent such internal wiring issues when the hoist loses its load weight.

Solution:

• Check if there is any obstruction during the descent process that hindered the microphone from lowering normally, causing the hoist to lose its load weight and activate the anti-loosening device automatically.

• Verify if the anti-loosening device switch inside the guide is damaged.

(If the issue persists, please contact customer service online for further assistance with resolving the problem).